Spey Pages banner

Sage 5120 Ultralight Spey

7.6K views 26 replies 13 participants last post by  SMR  
#1 ·
Hello All,
I am interested in trying this rod for trout in big waters.

What can anyone tell me about the action, line recomendations, other rods I should consider.

This is definetly a specialty rod and none of the shops here have them in stock so I wanted to get some feedback before I spend a bunch of time trying to find one to test.

Thanks
Have a great day
 
#2 ·
Technofish,

the 5120 is a great little stick for trout. You may find it just a tad bit light for some of your larger Bow fish. Another option would be the CND expert 6/7 which we sell as more of a 5/6. This rod is similar in action(pretty soft) to the 5120 but has a bit more backbone which would be perfect for your larger Bow fish. As well the CND is half the price of the SAGE. As for a line for the 5120 I would suggest the line that Sage makes for it for dry line work and a Rio Windcutter 5/6 for tips. I have to qualify this advice as I have never fished the Bow, however most of the speys that we sell in Calgary seem to lean toward the heavier side(7 and 8 weights).

Brian Niska
 
#4 ·
I purchased a 5120 last spring and used it extensively last summer, both for grayling in the Northern Yukon and for rainbows in the Cariboo with a Windcutter 5/6 on a Hardy St John. I like the rod, it is soft traditional action and easy to cast. It is also easy to overpower when you are casting, so it makes you work on your timing. It does handle up to 3 lb rainbows ( probably bigger) without much problem. It is a fun rod for smaller fish, you really know they are there.
If you need a rod to control larger trout in a hurry, or to use sink tips a lot, it may be a bit light. I think the Loop 7116 or one of the rods mentioned above might be better.

Jim
 
#5 ·
I have fished the Sage 5120 a fair amount. Very nice rod and tons of fun for trout and small steelhead (4-6 pounds and a long way from the ocean). If you use the butt to fight fish it should handle the Bow's hogs. I feel that the Sage line overloads the rod and prefer the Rio Windcutter in the 5/6. I have also had fun with the 6/7/8 windcutter with the 2nd tip removed. This gives you a 39' or so shooting head. The rod will handle fairly large flies but I wouldn't try to chuck heavily weighted flies. I mostly use mine for swinging soft hackles and unweighted streamers for trout. Lots of fun.

Greg
 
#6 ·
T&T also makes the 1206, which is a fine faster action 5/6 2-hander that is 12 ft long. Meiser also makes several other very nice 2-hand trout rods, for instance a 13 ft for 5/6. G.Loomis has the new for this year Metolious 13'4" for 5/6 as well.

As you can see, there is a good selection of 12 to 13 ft rods in the 5/6/7 range available that will do exactly what you are looking for today.
 
#7 ·
trout spey

I am a big fan of SAGE, but do not buy the 5120 (it is not a 5 weight). I too have wanted a true trout spey for some time. I have been involved with Gary Anderson and Bob Meiser developing new smaller speys which have resulted in four new 13'3" rods from 6 thru 9, and they are awesome but not quite trouty. However, today I cast a brand new rod from Meiser, 11' 7", could be extended says Bob, and it was fabulous. This is the first blank of this model Meiser has built. I measured it with the CC method and it takes 60 cents to fully load with an action angle of 72, very fast and progressive. This equates to 340 grains of spey head which is slightly less than the Windcutter 5/6. Spey lines for this size rod are not in production but I have some tricks.

Gary Anderson has a 13 foot 4 weight spey that likes 310 grains of head weight and it is a dream. It is also fast and progressive. Only 3 have been built and we few, treasure them.

You will hate yourself if you do not check out these new cutting edge trout spey rods.
 
#8 ·
Wow,
Thanks for all the great advice/opinions. I really appreciate it.
I had a chance to try the g loomis metolius mentioned above and it is a very nice rid, definetly a faster action than the what the Sage sounds like.

I am hoping to swing soft hackles but would like to be able to add a heavier tip for getting streamers down. So is it everyones opinion then that I should go for something a little more stout thant the 5120?

You guys have got me interested in the meiser rods. Where can I go to try one in/around Calgary? I know there are a couple of others using spey rods on the Bow, but we are few. I appreciate most of the Speys sold out here are 7,8, and 9 but I assume most of those are for trips to the ever calling BC steelhead country.

Thanks again,
Have a great day
 
#9 ·
It is definitely not my opinion that you should discount the 5120. As I said earlier, it is a traditional action rod ( I would not agree that is is not a 5 wt) that casts nicely with a 5/6 Windcutter.

It is a light, gentle rod and in the opinion of others more skilled than I at spey casting, it may be too light and there are other newer rods that may be better, I can't really comment on their opinions. If you want a light trout spey rod, I think it is fine.

I would buy another one if I lost this one.

Jim
 
#12 · (Edited)
SPG, if the Sage 5120 is not in your view a true 5 what weight would you call it?I am curious what lines you have tried on it? I am also wondering about the 13' 4 weight . If it is a true 4 I would have guessed it to be incredibly whippy not fast and progressive like you say. What line do you put on it and have you ever tried it with a tip of any kind?
Brian
 
#13 ·
Brian. My experience with the 5120 was at the Sandy Spey Cave last spring. Friends and I attended the entire weekend and played with the 5120 a lot. We started out with the Sage line that is made for this rod. The head weight on the Sage line is 500 grains which is more suited for a 7-8 spey rod and tells you right away that there is a problem. We had a large selection of lines at the clave to try and we did. We tried many windcutters mid speys and the Airflos. The best line we thought was the Airflo Bankmaster 7/8, a long bellied delta taper for single handed rods. However we did not find a line that really worked well on the rod and many others at the clave had similar feelings. When you get your hands on a really good spey rod and the right line for your casting stroke the performance is effortless. We could not achieve this with the 5120 and I have cast other speys that have this magical feel. Since I have a 11 single hand Sage rods and a 7136 Sage spey, I can tell you that I like Sage products, just not the 5120.

The Anderson 13' 4 weight is not wimpy because like the Meiser 5 spey has a very progressive action. Created thru taper and/or the use of ultra high modulous graphite which is critical in the design of small speys as it creates a fast action )(70-72 degrees action angle). Without a fast action progressive rod you would have a wimpy noodle with a very narrow power range and it would not be friendly to cast. Lighter line weight rods are much more difficult to create that are easy to cast. The 2 spey rods that I have mentioned are delightful, even magical, to cast and fish. I have seen nothing else in these sizes that come close. I have not fished The Meiser rod with tips but the Anderson 4 handles short tips (up to 9') well. I hope this helps.
 
#14 ·
TechnoFish

Do yourself a favor and contact Bob Meiser and see if you can try one of his 10'6" Two Handed Switch rods in the 5/6 category.

Use this rod with a Wind Cutter 5/6 floating line, and you will have a trout rod that you can use in a boat, canoe, pontoon boat, from the shore or wading. You can roll cast it, overhead cast it and do Spey casts with it. You can parachute cast a small dry or lob an indicator with a weighted nymph 60 to 70 feet up stream or across the river and have immediate control. It is a dream to double spey or snake roll a fly.

Like all of Bob's switch rods, when you hook a fish, you can turn the rod parallel and sideways and really lean into the fish. That means you get the fish in faster and do less harm to the fish while getting it in for the release.
 
#15 ·
No, try the 11'4" and 11'6"

No, call Bob and ask to try the 5wt in 11'4" 4pc and 11'6" 3pc. Forget the Sage!

The 4pc is sweet, and 4pc is convenient .
But if you're like me, you'd fall in love with the 11'6" 3pc instantly, and decide to buy both!

Use a 5/6 WindCutter on both.

Really, performance and aesthetics aside, just look at their prices, forget the Sage.
 
#17 ·
SMR, the 5120 IS a 5 wt. The windcutter 5\6 is great on the rod and the packages makes for a great "trouter". I agree that the 500 some odd grain Sage line overloads the rod and is better suited for the 6126. I am not sure why folks have a problem with this set up for it seems VERY easy and fun to fish. It might be because it is so different then the other rods in Sage's traditional line but if you try the new 8136 (also a fine rod) it has a very simular action, not even remotely close to say a 7136. It is oranges and apples. The important thing is to try them yourself and see what you like. Myself, I like to cast ALL types of rods, from the old Sage brownie 9140 (slow and even slower yet..this B&W hexy thingy 12'7 wt that my friend Kelly has. You can finish your sandwich waiting for it to unload) to the fastest rods made (T&T, Scott A2's and such). i like it because you have to learn alot of different styles to cast this wide range of rods and it is all fun and really all has its place on the river. I think alot of time you get people who prefer quick rods and say that anything else is ****e and visa-versa so it can get confusing when asking for opinions on rods. None the less, the 5120 is a 5 wt. and a fun "trouter".

Greg
 
#18 ·
Please do not forget that, there is a cast called the single handed spey which, with a bit of practice can shoot a lot of line. The added advantage of spey casting with a single handed rod is that you can also haul the line for added power.

While, not a true spey cast, as all the power and angle of the cast is driven and directed by the one hand, it does have similar mechanics. For this reason I have never had the need for a trout spey rod. Often there are only a few spey casts required to get past an obstacle to the rear of the caster, after which the angler can carry on overhead casting in the traditional manner.

The only advantage I can see to a trout spey caster is the ease of the cast which would eliminate the casting fatigue(to some extent) of an all day fishing session. My advice, if you get tired, rest the water(and watch it) for a while and collect your thoughts.:rolleyes:
 
#19 ·
GPearson said:
SMR, the 5120 IS a 5 wt. The windcutter 5\6 is great on the rod and the packages makes for a great "trouter". I agree that the 500 some odd grain Sage line overloads the rod and is better suited for the 6126. None the less, the 5120 is a 5 wt. and a fun "trouter".

Greg
ok bear with me here , i'm new to all this..

so the 5120-4 , works better with Rio's Windcutter 5/6 floating line?

and Sage's 6126-3 works better with Sage's own custom designed #5wt Spey line ?

have i been paying attention?? LOL :hehe:
 
#20 ·
The 5120 works very well with the new (green/yellow) Windcutter 5/6. It will even handle some tips.

I like the Windcutter 6/7/8 on the 6126-3. Just a personal preference.

To Gary W's point, while spey casting is really cool, I cannot find too many situations that work really well for rainbows. I can see swinging for sea-runs and the like, but for nymphing and such, a single hand spey cast works great and leaves your offhand for line management duties.

2 cents,

John
 
#21 ·
I don't think anyone every said anything about "needing" a two handed trout spey rod:devil: If we all stayed to the rods we need then one single hander and one double hander would do it. And I would have to agree that you can do pretty well everything with a single hander for rainbows that you can do with a 5120.

And then Sage and Loop and Meiser and B/W and Hardy and T&T would all go broke. And we wouldn't have much of a forum.

But this is more about rods we want::hehe: And two handed trout rods give you a lot of practice at double handed casting, more than most of us get in actual salmon/steelhead fishing (depending on where you live/fish of course)

And when a decent rainbow hits a half sunken stimulator on the 5120 at the bottom of a swing, it feels a lot like steelhead fishing:smokin:

Jim
 
#22 ·
Greg,

You are right on regarding folks expounding on their favorite rods and saying all other are not any good. That is why I always let folks know that I have a very strong preference for fast rods and then offer my opinion in response to the question. This is a far better way to provide information to someone and it allows the person asking the question to make up his own mind as to what would be best for him.
 
#23 ·
Hey Jim,
You are bang on. I really want a double handler that will be "fun" to fish in my local river because I really like Spey casting and I do not get out to the costal tribs as often as I like. So when I am there I would like to be in good form to take advantage of that opportunity.

I have a very good success rate on my local waters with the current styles that I fish, so I am not trying to increase my chances. I just think swinging a softie would be different and I might just feel like I am farther west when a 25" rainbow comes a knockin'.

Regardless, I have had some great feedback and PM's from people on this subject. Except that now I have to look into a few more rods like the meisers and cnd or maybe consider fishing a 7 wieght so that I can use tips also and really feel like i am on bigger water.

Thanks for your input folks, this is good stuff.
Have a great day
 
#24 ·
I was at one point very interested in the 5120, however through a long turn of events and information I figured that I could kill two birds with one stone by making a rod that could be cast as two-hand or single-hand. The only way I figured I could do that was with a relatively light rod that was short for a two-hander and long for a one-hander; a 10' rod seemed the perfect choice, and my preference for really fast rods led me to the Horizon. The rod's so light that hauling the single-Spey is no problem, yet making two-handed Spey casts is also no problem. This, obviously, is using lines for single-handed rods. So it's possible to make the casts and be stealthy; this is what I was after from the beginning.
With all of this in mind, I'll probably still end up buying the 5120 one day... because, as JimC pointed out in his post, it's not that I really need the rod; rather, I'd like to add one to the rack! ;)
 
#25 ·
SMR, ya man, you got it. Windcutter 5/6 for the 5120 IMHO.

Gary W and JGS,

Let me explain way i like to fish the little two hander for trout. I have fished for a long time and guided for the past 10 years for trout and although i still like to fish the spring creeks sight fishing with dries I am tired of blind fishing with large attractors and such. Here in the Rocky Mountains we have large rivers and a common way to fish them is to explore the water with a huge foam dry fly and a bead head dropper dangling below. Nothing wrong with that except that I am tired of it. I get to stare at big dries long enough while guiding. So when it is my time to fish I go looking for steelhead partly because I really enjoy two handed casting. Well, i can't always make it to a steelhead river. When I can't, i shed the huge pack that i wear while guiding equipped with a full fly shop inside and instead carry one spool of 4X and a small box of soft hackles, that's it. I would rather swing soft hackles and not catch fish then catch 50 trout while blind fishing with a mega foam thingy fly. What happened is that my friends and I started to catch fish, sometimes just one or two and sometimes the soft hackles actually out produced all other methods, which surprised me. So then we started experimenting with times of the year and hatches and are still experimenting with fly patterns and swing speed. THE TUG IS THE DRUG! And the bonus....it is perfect for spey casting. Do I always use the 12 footer? No. More often I use(spey cast) a 8 1/2 foot 4 or 5 wt. But when the water is big enough, I like to use TWO HANDS.

Right now for example, our rivers have great midge hatches and the fish are rising all through the middle of the day. You can fish dries, very fun and some what challenging because the dead drift has to be perfect and in an area the size of a coffee cup. Of course it is hard to see the tiny bugs and you really have to pay attention. As I said above, I get plenty of time to pay attention, so now I would rather swing a Syl's midge (Sylvester Nemes)trough the riffle or pool and wait for the tug, watch the boil, the line tightens up and the "Perfect" sings. Why do the trout eat a size 16 soft hackle on the swing when the natural emergers are 22's? I do not know. I am just glad that they do.

Greg
 
#26 ·
I would call my 5120 an 8wt I've used the SA 8wt Steelhead taper, the 7/8 mid spey with tip 2 removed on the rivers. I just don't know if swinging a fly for cutts really works though. Technique is different for cutts than steelhead. Just got the 5/6 WC this winter and had it out warming up my trout Spey. I thought it was a good match. That rod really shines in the salt when tossing shooting heads. The 35' Airflo 10wt is right at 350 grains. I use the 15 lb. amnesia running line and it is so sweet for cutts. I also like using auqualux heads between 300 and 400 grains. I think the best head weight for the rod is between 350 to 380 grains for whatever setup you use.

Matt Burke