Spey Pages banner

1 - 20 of 75 Posts

·
Registered
Joined
·
577 Posts
Discussion Starter #1 (Edited)
I was looking around today,, and I have a few new in the new 2012 models that need to go away. . . These will be also sent duel drag disc and click. These where never used they just have scratches or nicks, racking marks, most under the coating. IF you see this add I have MORE.

Sandblast and silver PLATE WIND MODLES BRASS HARDWARE ONLY





4" SPEY $325

4 1/4" RIVER SERIES $400

Please JUST post your questions here to save on the double questions and for that bump. :)
ALSO Please use my speypages email If you just want one
add your paypal email address , hand direction, and I will send off the invoice and take care of the rest.

The 4 1/4" reels would look like this one.


4" symmetry series wide / BUT WITH BRASS TRIM





Thanks
 

·
Registered
Joined
·
577 Posts
Discussion Starter #4
Thanks spey rookie I see that.
I could be the S but It's a 50 up charge, and I could do the Circle spey as well at that cost for a bit. But that cant last long like this sale in general.
 

·
Registered
Joined
·
117 Posts
Hey Tim, whats the weight of the symetry spey in this fasion? Also what would it be with the s handle upgrade?

Thanks

Mike
 

·
Registered
Joined
·
42 Posts
What would you suggest?

Would any of these be well-suited to a 6-weight TFO Deer Creek 11' switch? this might be just what I wanted for it.

-Sean-
 

·
Registered
Joined
·
577 Posts
Discussion Starter #7
Sale in now over

THE SALE ON 4" SAND BLAST AND SILVER SKANDI AND SKAGITS IS NOW OVER THESE ARE GONE I STILL HAVE I FEW 4 1/4" and 4" WIDE :saeek::saeek::eek::whoa:

THANKS GUYS I WILL GET THESE READY FOR SHIPMENT!! :Eyecrazy:

Cleaned me out fast as drinking Castor Oil
 

·
Registered
Joined
·
577 Posts
Discussion Starter #8
Hey Tim, whats the weight of the symetry spey in this fasion? Also what would it be with the s handle upgrade?
I said HEY MIKE D :) Nice name, That would be $ 375 with the S The weight would depend on the build, But in that 14 to 15 range

All these reels would be to big for a 11 footer, BUT Email me my 3 3/4" will be the one needed.
Thanks
 

·
Registered
Joined
·
577 Posts
Discussion Starter #10
www.speyco.net for more.

HERE IS THE HOME PAGE INFO


Welcome to the Spey Company home site.
My SWITCH AND SPEY FLY REELS are now in stock

SHOP SPEYCO REELS

PROUDY MADE IN THE U.S.A.





* The Reels are machined in the U.S.A. from solid 6061 T6 aluminum.

* Spools are designed using a 1/3 arbor to ensure the ample line and backing space required for spey fishing, and are exposed on one side of frame on all models for feather palming.

* Cages are fully 4th axis machined.

* Gears and pawls cut from Hardened Tool Steel.

* externally and internally adjustable bi -tension drag system on plate models.

*internally adjustable on The Snake Roll models.

* left and right checking systems and single action.

* Stainless steel pawl posts with a thread and nut application for a longer lasting post stability.

* Lifetime limited warranty.



* HANDLE CHOICES*

* Black

* White

* Marbled Grey.


*HARDWARE AND FOOT CHOICES*

* Hard brass foot adds 1 oz to reel weight, counter weight , and handle cup

* 6061 T6 aluminum foot , counter weight , and handle cup


*CAGE AND SPOOL FINISH CHOICES*

* Hard Coat III Anodized to a dark machine gun matte black finish. Hard Coat III is the second hardest substance in the world, preceded only by diamond. This coating will not scratch off.

* Raw; just left up the mother nature to patina.

* Electro-Clear coated to preserve the natural beauty of the material.

* Glass beaded sandblast, non-reflective.



* BEARING CHOICES*


* ABEC-7 STAINLESS STEEL ball bearings


* NEW For 2010 Abec 7 IGUS Composite bearing very light, very strong


* WINDING PLATE OPTIONS*


* Hard Brass adds 3 0z

* Titanium 6Al-4V adds 2 oz

* 316 Stainless Steel adds 2 oz

* T-6 6061 Aluminum "Base listed reel weights"



*SNAKE ROLL UPGRADE OPTIONS*

* Any Spey Co Reel can be upgraded with the classic"S" handle.

Bull Bog 5052 Aluminum

316 Stainless steel Snake Roll

Snake Roll 6061 Aluminum


*REEL SPECIFICATIONS IN INCHES*
Single Spey 3" x 1" spool gap 5/8"
River Switch 3 3/4" spool gap 1 1/8"
Skandi Spey 4" x 1 1/2" spool gap 1"
symmetry Skagit 4" x 1 7/8 " spool gap 1 1/8 "
Symmetry Spey 4"x 2 1/8" spool gap 1 1/2 "
River Spey 4 1/4" x 2 1/8" spool gap 1 1/2 "


*REEL SPECIFICATIONS BY WEIGHT*
Weights vary via material used by design. Now you will never have to fish with a tip heavy rod again. Just by changing the different face plate and foot options, you can gain perfect rod to reel balance.

Single Spey 4.3 0z to 7.5 oz
River Switch 8.7 oz to 10.5 oz
Circle Spey 10.8 to 11.8
Skandi Spey 11. 5 0z. to 13.5 oz.
symmetry Skagit 12 oz. to 15.5 0z.
Symmetry Spey 13.5 oz. to 17.5 oz.
River Spey 14.5 oz. to 18.5 oz



*REEL SPECIFICATIONS IN METRIC*

Single Spey 72.2 mm x 25.4 mm spool gap 19.5 mm
Skandi Spey 101.6 mm x 38.1 mm spool gap 25.5 mm
Symmetry Skagit 101.6 mm x 48.2 mm spoolgap 28.3 mm
Symmetry Spey 101.6 mm X 53.3 mm spool gap 36.5 mm
River Spey 111.7 mm x 53.3 mm spool gap 36.5 mm



*REEL TO ROD SUGGESTIONS*

Single Spey 7/9 foot single handed rods
Switch Reel 10/12 foot spey rods
Skandi Spey 12/13 foot spey rods
Symmetry Skagit 13/14 foot spey rods
Symmetry Spey 14/16 foot spey rods
River Spey 15/18 foot spey rods




*BACKING CAPACITIES*

Single Spey 115 yds. of WF3F line, 100 yds. of WF4F line, 75 yds. of DT-3 line. All with 20 lb. backing.

Skandi Spey 180 #30 pound gel spun +100 yards varivas+36' Rio AFS 6/7 400grain
150 yds of #30 dacron and a 6/7 CND GPS

Symmetry Skagit Rio windcutter 8/9/10 + 175 #30 dacron
Skagit head + 100 varivas + 250 yards #30 dacron

Symmetry Spey Rio windcutter 9/10/11 +200 yards #30 dacron
Rio Mid Spey 9/10 +175 yards #30 dacron
Next cast long belly 9/10 + 150 yards #30dacron

River Spey Rio Mid Spey 10/11 + 300 yards #30 dacron
Rio xlt +250 yards #30 dacron
Double taper +200 yards #30 dacron
 

·
Registered
Joined
·
577 Posts
Discussion Starter #12
These circles are not nicked or dingered.>>>>

REALLY SORRY TO GET ALL THE DISSAPPOINTED EMAILS FROM THE GUYS WHO MISSED OUT. IF YOU ARE LOOKING FOR A REEL TO TAKE A SKAGIT AND SKANDI LINE. I WILL OFFER THE 4" CIRCLE SPEY REELS AT THE SAME PRICE $325 AS A SPEYPAGES ONLY SPECIAL.
IN HARD COAT BLACK ,, POTED OR NON PORTED SPOOLS WITH BRASS HARDWARE.

AGAIN UNTIL I GET LOW ON STOCK THEN I HAVE TO PULL IT.
THANKS MUCH


PHOTO SHOWING ALUMINUM


I FORGOT TO TAKE PHOTOS OF THE BRASS TRIMMED REELS BUT YOU GET THE POINT.

PHOTO OF 2010 REEL BUT SAME PORTING
 

·
Registered
Joined
·
478 Posts
oh man...if I only had the cash!!! I'm a proud owner of one of Tim's reels and wish I could fish it on all my rods. Guess I will need to buy more some day. Buy them up before they are gone!!!

craig
 

·
Registered
Joined
·
577 Posts
Discussion Starter #14
Too funny Craig honestly I wish I could have had the sale go on longer than 24 hours :confused: at least a week :chuckle:

If anyone is still looking for a reel I do still have

4" circle spey, 12.6 to 14 foot rods
4" symmetry spey 14.6 to 15 ish rods
41/4" river series BIG rods 15 to 18 If you need the brass plate for that added weight I will add that option to this reel If you like.



$400 for this reel ?? I must be nuts!


if you want one these do it up,, the sale price on these is going to get pulled soon as well.

HAPPY SUNDAY GUYS
 

·
Registered
Joined
·
271 Posts
Hey Tim,
I've seen some photos showing ported and non-ported winding plates on the Skandis. Are the non-ported winding plates going to remain as an option? Thanks!

Joe
 

·
Registered
Joined
·
577 Posts
Discussion Starter #17 (Edited)
OK got most of these dinger sale reels out the door. My opogies to the few orders being a bit tarty "So past the two week delivery time" It happens I guess when you guy hit me like a pack of wolves :razz: and the over the holiday week .. Needless to say this sale went better than I thought. In the move prep I did find a few Skandi spools in the Hard black NON ported, with the same issue finish scratches.
Here is a photo of one.

In the spirit of Christmas being on the way 385 / shipped worldwide. These would be S handled Black and silver reels here is a photo of the slight issue, Nothing big so look close and you have to hold it on an angle to the light to see them.




4" SKANDI NON PORTED 2009 SPOOLS >> DINGERED<<


IT would look like this - the outer 4 screws these would be phillips head screws.

ALSO I have just this one reel.




I was making it the other day with the new C clip Then I DROPPED IT :whoa: Taking photos of just the spool,, :eek: It hit a rubber floor mat BUT then rolled onto steel work bench, SMALL dinger on outer spool rim. Dinger is still black because it is hard coated .

The reel is 100% nothing more than what would happen in the first trip really.. So 300 bills for this one, OR better yet JUST stay away then I get to keep it. because I like this one. SOLD

IF YOU WANT ONE PLEASE EMAIL ME WITH YOUR PAYPAL ADDRESS.
AND WINDING DIRECTION I WILL TAKE CARE OF THE REST.

THANKS MUCH AND GOD BLESS.
 

·
Registered
Joined
·
195 Posts
Telephone latch reel

That is one cool looking reel Tim, what is the specs on it and will it be available in a 4" size to accommodate a 55 ft or longer line.

Cheers
 

·
Registered
Joined
·
577 Posts
Discussion Starter #19
55 foot head yes and no problem. Its a realy big 4" reel. It comes in at 12.5 OZ with that brass foot. I needed to add the tele latch to this reel as this was my screen saver and my inspiration photo for the Circle spey reel.
I think its a dingley make? Not sure really, but I just loved the photo for some reason. SO Thanks much to whoever took the original photo!


Unnamed sexy trout photo..
 
1 - 20 of 75 Posts
Top