Spey Pages banner
1 - 1 of 1 Posts

998 Posts
clean the scratch/chip area with alcohol
Fill scratch/chip with clear nail polish slightly proud of the blank finish
once dry/cured mask off the area all around the repair area. (use as little as possible to minimize sanding work)
Sand down the proud repair level with 600/1000/2000 grit wet/dry paper using water.
once level and blended in to existing clear coat, polish with auto polishing compound to match the shine of the existing finish
auto wax the area.

If you do a good job of it the ding will be undetectable and the whole thing might take you 10-30min once the nail polish has cured.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.