Tcx problems - Spey Pages
Spey Pages    

Home | Sponsors | Spey Clave



Go Back   Spey Pages > Spey Clave Casting Forums > Rods
User Name
Password
Register FAQ Members List Gallery Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
  #1  
Old 10-30-2011, 07:49 AM
SpeyDane SpeyDane is offline
Registered User
 
Join Date: Oct 2011
Location: Scandinavian rivers
Posts: 6
Tcx problems

Hi,

Are there anyone else who has had problems with the joints on the Tcx "baby spey" rods?
Afte a few days of fishing, small cracks appear in the different joints on the rods.. Sometimes it looks as if the varnish on the female joints goes white with a clearly crack in it and a dark crack forms on the blank and up towards the first guide on each of the different sections?
I have seen this problem on the 5119 + 6119 and 8119 rods.
I am using Rioīs ASF heads on each rod and mostly for spey-/switch casting.
The line weights are lighter than those recommended for skagit...
Any ideas, anyone?

Mikkel
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 10-30-2011, 09:42 AM
t_richerzhagen t_richerzhagen is offline
Registered User
 
Join Date: Feb 2002
Location: Deschutes, Ronde, Snake, Walla Walla
Posts: 2,842
Welcome to the Board.

Do you have pictures? That might help. Also, you can PM Meiser, Burkheimer, and ACR, custom rod builders on this Board.
__________________
Ted
Speyclave Contributor

Practice is about increasing your repertoire of ways to recover from your mistakes. Joann C. Gutin
Reply With Quote
  #3  
Old 10-30-2011, 09:47 AM
SkagitMiester SkagitMiester is offline
Registered User
 
Join Date: Dec 2009
Location: Deschutes
Posts: 1,330
Quote:
Originally Posted by SpeyDane View Post
Hi,

Are there anyone else who has had problems with the joints on the Tcx "baby spey" rods?
Afte a few days of fishing, small cracks appear in the different joints on the rods.. Sometimes it looks as if the varnish on the female joints goes white with a clearly crack in it and a dark crack forms on the blank and up towards the first guide on each of the different sections?
I have seen this problem on the 5119 + 6119 and 8119 rods.
I am using Rioīs ASF heads on each rod and mostly for spey-/switch casting.
The line weights are lighter than those recommended for skagit...
Any ideas, anyone?

Mikkel
Are you taping the ferules or waxing them and double checking for tightness often and regularly? I have not heard of any complaints on the rods- weird.
__________________
"Learn to sneak, man, learn to sneak." Patrick McManus, Gunrunning.
Reply With Quote
  #4  
Old 10-30-2011, 11:00 AM
matuka mike's Avatar
matuka mike matuka mike is online now
registered text offender
 
Join Date: Oct 2010
Location: a bridge too far inland
Posts: 870
tcx AND vxp

same on my 7119 and vxp, also seeing cork problems too
__________________
fishing over redds causes erectile dysfunction. karma is everywhere !
Reply With Quote
  #5  
Old 10-30-2011, 12:09 PM
SpeyDane SpeyDane is offline
Registered User
 
Join Date: Oct 2011
Location: Scandinavian rivers
Posts: 6
I am always checking, carefull not to get sand and etc. In between the joints....
I have been recomended by sage not to use any ferrule wax, since this could cause the joints to get Stock, because of the tight fit and very low tolerance in the diameter... i have never had any problems with the rod pieces becoming loose during a full day of fishing...
Reply With Quote
  #6  
Old 10-30-2011, 01:09 PM
SpeyDane SpeyDane is offline
Registered User
 
Join Date: Oct 2011
Location: Scandinavian rivers
Posts: 6
Here is a picture of how it can look....
it is realy weird
Attached Images
 
Reply With Quote
  #7  
Old 10-30-2011, 04:11 PM
SteelerHeeler SteelerHeeler is offline
Registered User
 
Join Date: Feb 2010
Location: State of Jefferson, SW MT, 5 o'clock somewhere
Posts: 748
Wow. That is strange. I've fished the 7119 and 5119 quite a bit and have not experienced anything like that. I also quit using wax, the tolerance is tight and they stay together OK during a day of fishing without tape or wax. Please keep us apprised.
Reply With Quote
  #8  
Old 10-30-2011, 04:13 PM
forkedhorn forkedhorn is offline
Registered User
 
Join Date: Aug 2011
Location: Deschutes, N. Umpqua, Willamette
Posts: 9
I have a 7119 and have the same issue with my bottom ferrule doing the exact same thing you described. In mine it continues up past the thread wraps and into the thread wraps for the bottom eye. There is a noticeable crack in the blank but in the few days I have fished it since I noticed the problem it doesn't seem to be spreading. I have fished the rod for probably 15 days this summer and other then that I have no complaints. I check my rod pretty regularly while fishing and have had the middle ferrule loosen up but can't remember ever having the bottom one do it. I also have a 7126 TCX and have had no issues with it regarding cracking.
Reply With Quote
  #9  
Old 10-30-2011, 05:24 PM
Johncke's Avatar
Johncke Johncke is offline
Registered User
 
Join Date: Jul 2006
Location: Scandinavia
Posts: 251
Exclamation

I’ve observed exactly the same phenomena on the female ferule 2’end section on my TCX 7126. Can’t see any hair line cracks inside the ferule. Never needed to use tape or wax since the rod stays nicely together all through the day. Besides the stripes/cracks underneath the lacquer many of the snake rings are loose from side to side. Only been using the rod with a 7/8 Rio AFS.

Johncke
__________________
The universe is change; our life is what our thoughts make it.
Reply With Quote
  #10  
Old 10-30-2011, 08:01 PM
wrx_canoe wrx_canoe is online now
Registered User
 
Join Date: Nov 2004
Location: GBay and L.Ont. Tribs
Posts: 1,027
I'd be interested to hear what, if anything, Sage will do here. Functionally it may be fine but that shouldn't happen on a premium rod. Anything that plays on your mind while swinging could hamper hooking that one or two pulls a day.
Reply With Quote
  #11  
Old 10-30-2011, 10:14 PM
matuka mike's Avatar
matuka mike matuka mike is online now
registered text offender
 
Join Date: Oct 2010
Location: a bridge too far inland
Posts: 870
my 7119 started out the same, but looks way worse than that pic. it now has several hondred hours use. same with vxp. both started after a few dozen hours, and are both right at about a year old. deathstar i have, a year or so older, is fine. maybe all these rods were built around the same time. i use wax, and never had them loosen or stick.
__________________
fishing over redds causes erectile dysfunction. karma is everywhere !
Reply With Quote
  #12  
Old 10-30-2011, 10:53 PM
middlecalf's Avatar
middlecalf middlecalf is offline
Internet Scientist
 
Join Date: May 2011
Location: Idaho
Posts: 1,124
Are these factory rods? That "crack" appears to run under the red band, not through it. What does the inside look like (use a really bright light), can you see if the crack is actually through the blank or just in the topcoat varnish? I'd send this pic and comments to George Cook (geocook at comcast dot net). Good luck. Paul
Reply With Quote
  #13  
Old 11-03-2011, 05:11 PM
FKrow FKrow is online now
Registered User
 
Join Date: Feb 2002
Location: New England
Posts: 1,166
Where are the white lines in relation to the guides?

They certainly appear to be similar to cracks however, the cracks may be only in the bright green outer finish, not the internal graphite structure.

Regards,
FK
Reply With Quote
  #14  
Old 11-06-2011, 06:21 AM
SpeyDane SpeyDane is offline
Registered User
 
Join Date: Oct 2011
Location: Scandinavian rivers
Posts: 6
I have had two rods where the cracks went all the way through and caused broken rod...
On some rods it looks as if the cracks stay in the green outer finish.
I have seen it all around the ferrules, does not seem to have any relations to the guides...
Best,
Mikkel
Reply With Quote
  #15  
Old 11-06-2011, 07:21 PM
FKrow FKrow is online now
Registered User
 
Join Date: Feb 2002
Location: New England
Posts: 1,166
My fishing partner and I teach spey casting on weekends.

Today we checked out our TCX rods.

Two 7126 TCX (one with hard use and is over one year old) in addition, three 11'9" TCX rods.

None have any signs of white marks or cracks.

Note that we also use candle wax and twist the sections together.

Regards,
FK
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
TCX 7126 and the Skagit Flights and AFS Heads and terminal gear for my new TCX 7126 Grampa Spey Rods 52 12-28-2013 05:47 PM
wtt tcx 9140 of tcx 7126 Mike Honcho Spey Classifieds 0 02-01-2011 01:32 PM
Polyleader problems xgolfman Tackle 1 07-09-2009 08:29 PM
Anyone else having problems with our rivers? xgolfman General 6 10-05-2007 12:46 AM
Server Problems sinktip General 5 11-14-2005 11:26 PM


All times are GMT -4. The time now is 09:24 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.